Hangjia GX680H chassis review: high-looking E-ATX chassis : Gearbest

GX680H chassis standard with three 12CM color RGB fans, the color is fixed can not be adjusted, you can see the front panel X shape is very dynamic, have to admit, most people are appearance association, the appearance is not good-looking will not continue to look inside the chassis, this front panel I give praise.

Appreciation of appearance and internal structure

The GX680H chassis is a standard middle tower with a size of 420x210x465mm, the left side plate is made of 4mm toughened glass, and the glass is fixed with no hole chute design. The overall appearance of the chassis is high, without these details.

The front fan position can support up to 360mm water cooled row or 3 14CM fans, that is to say, it can be backward compatible with 280mm, 240m, 120mm cold discharge. The size of the standard fan is 12cm, which belongs to Hangjia GX122 full moon series, and the bearing is hydraulic bearing.

At the bottom of the front panel, the X-shaped design looks like a metal texture, but the actual material is made of relatively lightweight plastic. because of this, the whole machine can be lifted with one hand, and it is very convenient to move it.

The boot button is on the left side of the top of the chassis, and there is no lack of power lights, hard disk lights and restart keys

The front panel is also hollowed out on the side, which can enter the air and pass through the light

Very standard isign O panel interface, specification for 1xUSB3.0, 2xUSB2.0, 3.5mm audio interface, 3.5mm microphone interface

The right side panel of the chassis is not gaudy, and it is easy to cover it

Magnetic dust-proof net at the top outlet, which is easy to disassemble and clear ash, and can support 240mm and 280mm water-cooled discharge

At the end of the chassis, there are seven horizontal PCIe slots standard in the tower chassis. Here comes the bright spot. The eighth and ninth PCIe slot also appears on the top of the tower chassis, but it is placed vertically. Generally, the chassis that can support the upright graphics card should be close to four or five hundred yuan at least.

It should be noted that the graphics card should not be too thick. If some 2.5-slot or 3-slot large graphics cards are installed, the left toughened glass cover may not be installed.

The fan position at the rear of the chassis can support the water-cooled discharge of 12CM fans or 120mm

GX680H supports ATX, M-ATX, E-ATX and ITX motherboards. Six M-ATX copper columns are pre-installed. If you need to use a large board, you need to install the remaining copper columns yourself.

Independent power warehouse air duct, and graphics card, CPU heat dissipation does not affect each other

The fixed board of the motherboard is made of 0.6mm SPCC steel

At the bottom of the chassis, the power supply air inlet is equipped with a dustproof net and a rubber foot pad to prevent resonance. In addition, you can see that the hard disk shelf has two mounting bits. If you need to install a large power supply, you can move to the position near the front of the chassis, and if you need to install a 360 cold row, you can move to a position close to the power supply.

When installing the hard disk, you need to remove the hard disk cartridge and screw it first. The hard disk cartridge supports up to 1×2.5 inch hard disk + 1×3.5 inch hard disk.

The power supply position is not equipped with a vibration stop pad

Thanks to the removable design of the hard drive silo, after the power supply is installed, there is still enough space for the wire rod in the power bin

The left side of the power warehouse is hollowed out just to see the power sticker. This time, the power supply of the Hangjia GX600 game is used

The PCIe slot bezel is a disposable bezel, which cannot be reinstalled after removal. After all, it is a chassis of more than 200 yuan, so don”t get too tangled up.

The GX580 series made a concave on the right side of the motherboard for easy wiring, and the GX680H did not do the concave, but made two 2.5-inch hard disk positions.

All the parts are installed

A PCIe X16 adapter is required for upright graphics cards, which can be bought at a price of less than 100 yuan

Turn on the light

The light color of the chassis fan is fixed. I prefer to fix the light. I won’t go blind

The light of the front panel is reflected on other hardware

Summary

Many chassis like to do dead weight, although many people feel heavy is good, but in fact, I do not think it is heavy = good, the chassis is dead heavy, anti-resonance is also useless. The GX680H is very light and can be picked up easily with one hand, and it is very easy to move the chassis at ordinary times. In addition, the GX680H shape design, will not be very grandiose, the appearance is online, compared to 200 yuan price of other chassis are better-looking, light pollution is not serious, turn on and off lights are good-looking.

GX680H’s internal structure is also very good, 200 yuan price of the rare vertical PCIe card slots are equipped, dustproof net, a lot of anti-vibration pad, in addition to mechanical hard disk bit a little less, other water-cooled ranking, fan position are very sufficient, generally speaking, GX680H is a very good-looking and cost-effective chassis.

Recently, the AMD TRX40 motherboard is ready to be put on the market. TRX40 is the top chipset of AMD, and most of its motherboard type is Emure ATX. It just so happens that Hangjia GX680H can support Emure ATX, not to mention the top Z390, X299, X399jue TRX40.

You may also want to read:

Xiaomi Mi Watch Color VS HUAWEI Watch GT2 VS Amazfit GTR: Which is More Worth Buying?

Xiaomi Mi Watch Color In-depth Review: Fashion Products Without Electricity Anxiety

How to Turn your Xiaomi Mi Band 4 as a remote shutter for Android camera?

How to hide the display notch of Redmi Note 8 and Redmi Note 8 Pro?