However, for some “elderly” old computers, the motherboard does not have a standard M.2 interface, and the bandwidth is not enough, so they can only choose the traditional SATA solid-state hard drive. Today”s protagonist is a SATA interface solid state drive, produced by the industry’s well-known storage peripherals brand Orek, model Xunlong H100, capacity for 256GB.
Appearance & disassembly: a reliable and mature solution.
ORICO H100 solid state drive has a strong Oreko style in design, simple atmosphere, the middle of Oreko LOGO and CNC trimming are full of texture.
The label paper is affixed on the back, which explains in detail the product model, capacity, serial number, power consumption and so on. You can also check the authenticity and warranty by scanning the QR code and entering the serial number, which is very good for users.
As for the interface, it is also the traditional SATA data interface and SATA power interface.
Of course, in order to facilitate the installation of the ORICO H100 solid state drive, there are screw holes in the bottom and screw holes in the frame to meet the needs of different consumers.
And ORICO, as a major storage peripherals manufacturer, also brought a lot of 2.5-inch hard disk cartridges. For example, this transparent design of the hard drive box fits well with the Oreko H100 solid-state hard drive. With high appearance and fast reading speed, it is very suitable for white-collar elites to use.
The disassembly of the
ORICO H100 solid state drive is very simple, with a snap-on design, you can open the shell with a light pry along the edge of the metal cover.
You can see that the PCB motherboard of the
ORICO H100 solid state drive is very small, only half the size of 2.5 inches. Disassemble the fixed three small screws, you can remove the entire motherboard, a list of the main control and flash memory particles.
The Oregor H100 solid state drive is hosted by Huirong SM2259XT, a four-channel high-performance SATA 6GB/s SSD controller that supports 3D NAND flash memory from all major NAND suppliers and supports TLC NAND algorithms that optimize continuous performance. Therefore, the evaluation given by the industry is that it has high performance-to-price ratio, small size, high heating and low power consumption.
As for flash memory particles, the Oregor H100 solid state drive uses Intel original 3D NAND TLC particles, and the 256GB capacity is composed of four 64GB storage particles, which is why the PCB motherboard of the Oruike H100 solid state drive is so mini.
Performance testing: update of the old platform & enough for ordinary users.
Through the CrystalDiskInfo, you can see the relevance of the hard drive, such as firmware version, serial number, transmission mode, etc., and the standby temperature is only 40 degrees Celsius, which is very normal.
In the AS SSD test, the fastest continuous read and write speed of Orekor H100 solid state drive under 1GB file is 526.77MB/s and 485.06MB bank s, and the sequential read and write speed is very good in SATA solid state drive. 4K random read and write is 20.27MB/s, 71.16MB pocket s, and the final score is 754, which is not bad; when using 10GB files, the hard disk read and write speed can still reach 526.86MB/s, and the writing speed is 466.40MB pocket s, but the 4K score decreases somewhat, the reading speed is 19.79MB/s, the writing speed is 50.45MB Universe, and the final score is 349 points.
Using CrystalDiskMark test, the sequential reading and writing speed can reach 559.5MB/s under 1GB file, and the random reading and writing speed of 499.9MB and 4K can reach 39.24MB/s and 94.52MB/s. When using 32GB files, the sequential read and write speeds are 558.1MB/s, 486.9MB and 4K, respectively, 11.63MB/s and 49.37MB/s.
The Anvil’s Storage Utilities test results are also in line with expectations. The read speed of Oruike H100 solid state disk is only 526.34MB hands, while the write speed can reach 442.91MB hands, which has basically squeezed the performance of the SATA interface.
As for the ATTO Disk Benchmarks test, the Orek H100 solid state drive performance is also very stable, basically writing 480GB/s or above, reading 500GB/s or above.
Finally, let’s take a look at the test results of HD Tune. The lowest write speed is 56.7MB/s, the highest is 327.3 MB, and the average speed is 104.2 MB.
Summary of review room:
As a manufacturer who has been deeply engaged in the field of PC/ digital accessories for many years, (ORICO) has already sold all over the world, and its products cover a very wide range, among which the product lines such as mobile power supplies, USB HUB and hard disk boxes are well known by gamers. This time, it is the first to open up the solid-state disk market, with both brand word-of-mouth as a groundwork to showcase its own technical precipitation in the storage field. At the same time, it can provide consumers with a high-quality choice, which is a win-win game.
As an entry-level SATA solid-state drive made by
ORICO , the H100 does well in design and performance, and the price is reasonable. The version of 256GB is just over 200 yuan, with a 5-year warranty, which is extremely practical for old computers. If a small partner wants to speed up the old mainframe and laptop, this solid-state hard drive is worth a try.
 |
Extensive Product Selection● Over 300,000 products ● 20 different categories ● 15 local warehosues ● Multiple top brands |
 |
Convenient Payment● Global payment options: Visa, MasterCard, American Express ● PayPal, Western Union and bank transfer are accepted ● Boleto Bancario via Ebanx (for Brazil) |
 |
Prompt Shipping● Unregistered air mail ● Registered air mail ● Priority line ● Expedited shipping |
 |
Dedicated After-sales Service● 45 day money back guarantee ● 365 day free repair warranty ● 7 day Dead on Arrival guarantee (DOA) |
